Beijer-electronics SCOM RBC EN Manual do Utilizador descarregar pdf (Página 40)

Command Reference

40 Beijer Electronics, MAEN993

5.6.15LAU_CONFIG_SETDISPLAYADR (0x018F)

Device Address

Stores a software address of a device in the internal memory. This address is used, if

the device is configured to override the DIL switch settings. Only the address is

changed; not the group.

Supported since Firmware Version

LAUER RBC: 0.0.0.1

Command Stream

Response Message (Acknowledge)

Response Message (Negative Acknowledge)

Under normal operation conditions, a device never sends a negative acknowledge in

response to this command.

Maximum Lr for this Command

Note:

The changes made by this command will become active only after a restart of the de-

vice. This avoids loosing the connection to the device during configuration.

0 1 2 3 4 5 6 7...9 10

0x07 ADR

0x4C 0x41 0x55 0x03 ICHKH 0x01 0x27 Param ICHKD

Param

Value: 0 ...15 (0x00 … 0x0F)

Type: Byte

Length: 1

Description: Software device address

0 1 2 3 4 5 6 7 8

0x06 ADR 0x4C 0x41 0x55 0x01 ICHKH Ret ICHKD

Ret

Value: 0 ...15 (0x00 … 0x0F)

Type: Byte

Length: 1

Description: Software configured device address

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

Sem comentários

Beijer-electronics SCOM RBC EN Manual do Utilizador Página 40