Beijer-electronics iX Panel TA70 EN Manual do Utilizador descarregar pdf (Página 42)

Software

Requirements

Upgrading of the operator panel system program requires the following:

• APC

• An Ethernet connection between the PC and the operator panel or an empty

USB memory stick.

• The Image Loader executable ﬁle from the web site

UpgradingtheSystemProgramUsingaUSBMemory

Stick

When upgrading the system program using a memory stick, you can select to

delete or to keep the project in the operator panel.

Follow the steps below:

Connect an empty USB memory stick to your PC.

Double-click on the executable Image Loader ﬁle.

Select the drive of the desired USB stick and click Create.

The ﬁles are copied to the USB stick.

Connect the USB memory stick to the operator panel.

Cyclethepowertoinitiatetheupgrade.

UpgradingtheSystemProgramviaEthernet

When upgrading the system program via Ethernet, t he project in the operator

panel is retained.

Follow the steps below:

Make sure tha t your PC and the operator panel are connected via Ethernet.

Double-click on the executable Image Loader ﬁle.

Enter the IP address of t he operator panel.

Click Update, and follow the instructions.

The ﬁles are transferred to the operator panel. The panel will reboot

automatically when the transfer is ﬁnished.

BeijerElectronics, MAEN012A

1 2 ... 37 38 39 40 41 42 43 44 45

Sem comentários

Beijer-electronics iX Panel TA70 EN Manual do Utilizador Página 42