Beijer-electronics T15BR EN Manual do Utilizador descarregar pdf (Página 4)

Safety Precautions

1SafetyPrecautions

Both the in staller and the owner and/or operator of the operator panel must read

and understand this installation manual.

1.1 General

• Read the safety precautions carefully.

• Check the delivery for transportation damage. If damage is found, notify the

supplier as soon as possible.

• The supplier is not responsible for modiﬁed, altered or reconstructed

equipment.

• Use only parts and a ccessories manufactured according to speciﬁcations of

the supplier.

• Read the installation and operating instructions carefully before installing,

using or repairing the operator panel.

• Neverallowﬂuids,metalﬁlingsorwiringdebristoenteranyopeningsinthe

operator panel. This may cause ﬁre or electrical shock.

• Only qualiﬁed personnel may operate the operator panel.

• Storing the operator panel where the temperature is lower/higher th an

recommended in this manual can cause the LCD display liquid to

congeal/become isotopic.

• The LCD display liquid c ontains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open,ﬂushwithplentyofwaterandgetmedicalattention.

• Theﬁguresinthismanualservesanillustrativepurpose. Becauseofthemany

variables associated with any particular installation, the supplier cannot

assume responsibility for actual use based on the ﬁgures.

• The supplier neither guarantees that the operator panel is suitable for your

particular application, nor assumes responsibility for your product design,

installation or operation.

• It is recommended to turn on and shut down the operator panel at least once

before installing any components/cards or bef ore connecting the operator

panel to external devices, like for example serial devices.

• This operator panel is certiﬁed to operate in a Class I, Division 2, Group A, B,

C and D hazardous environment. The operator panel must be installed and

operated as described in this document to meet this certiﬁcation.

• Observe precautions for handling electrostatic discharge sensitive devices.

1.2 ULandcULInstallation

• All devices have to be supplied by a Class 2 power supply.

BeijerElectronics, MAEN165

1 2 3 4 5 6 7 8 9 ... 27 28

Sem comentários

Beijer-electronics T15BR EN Manual do Utilizador Página 4