Beijer-electronics SCOM Protocol EN Manual do Utilizador descarregar pdf (Página 61)

Command Reference

Elektronik-Systeme Lauer, MAEN976 61

Example

Query the total operation time in hours of the monitor at address 0.7 (group 0, ad-

dress 7):

The monitor at address 0.7 (group 0, address 7) has returned “0x00 0x00 0x9C”,

which indicates that the monitor was used 156 hours:

0 1 2 3 4 5 6

0x07 0x07

0x45 0x54 0x43 0x00 0x15

0 1 2 3 4 5 6 7...9 10

0x06 0x07

0x45 0x54 0x43 0x03 0x13 0x00 0x00 0x9C 0x63

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 142 143

SCOM Protocol 1
Foreword 2
Contents 3
1 Interface Configuration 9
2 Ethernet Communication 10
Dynamic Addressing 11
Static Addressing 11
Sample Application 12
SCOM Message Basic Format 13
4 Monitor Addressing 15
Ti: Inter-message gap [s] 16
Delayed Response 17
Related information 18
6 Command Reference 19
6.1 BRT 20
6.2 MAN 22
6.3 VER 23
6.4 POT 24
6.5 MCC 26
6.6 MCC_BRIGHTNESS (0x81) 28
6.7 MCC_CONTRAST (0x82) 31
6.8 MCC_SCALINGMODE (0x8C) 34
Main Video Signal Source 37
6.10 MCC_GAMMAVALUE (0x9D) 40
Selection 42
6.13 MCC_COLOURTEMP (0xB3) 47
Maximum Lr for this Command 48
6.14 MCC_REDLEVEL (0xB4) 50
6.15 MCC_GREENLEVEL (0xB5) 53
6.16 MCC_BLUELEVEL (0xB6) 56
6.17 TYP 59
6.18 ETC 60
6.19 LAU 62
Firmware Version 64
Host Name 65
MAC (Ethernet) Address 67
Static IP Address 68
Subnet Mask 69
Gateway Address 70
DHCP Mode 71
(0x0109) 72
(0x010A) 73
(0x010B) 74
(0x010C) 75
(0x010D) 76
DIL Switch Mode 77
(0x010F) 78
(0x0110) 79
Baudrate 82
POT Mode 83
ECDIS Mode 84
(0x0115) 85
(0x0116) 86
(0x0117) 87
(0x0118) 89
(0x0119) 90
(0x011A) 91
(0x011B) 92
(0x011C) 93
(0x011D) 94
(0x011E) 95
(0x011F) 97
(0x0120) 98
(0x0122) 101
(0x0123) 103
0 1 2 3 4 5 6 7...8 9 104
0x07 0x07 104
0 1 2 3 4 5 6 7 8 104
(0x0125) 105
(0x0127) 106
ECDIS Mode Control 107
Command Reference 108
Example 108
Buzzer Control 109
Digital Output Control 111
6.60 LAU_CONTROL_ANALOGTOBRT 113
(0x0204) 113
0 1 2 3 4 5 6 7...9 10 114
(0x0205) 115
Digital Input Configuration 117
Current IP Address 119
Current Monitor Address 120
Current POT Mode 123
Current ECDIS Mode 124
Current Buzzer State 125
Current Backlight State 126
Current Analog Input Value 130
(0x030C) 132
(0x030E) 135
7 Sample Communication 137
Application 137
CiS-Nr.: 360.610.0280 143

Comentários a estes Manuais

Sem comentários

Beijer-electronics SCOM Protocol EN Manual do Utilizador Página 61

Comentários a estes Manuais

Manuais e produtos relacionados com Monitores Beijer-electronics SCOM Protocol EN