Beijer-electronics SCOM Protocol EN Manual do Utilizador Página 29
- Página / 143
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Command Reference
Elektronik-Systeme Lauer, MAEN976 29
Response Message (Acknowledge)
Maximum Lr for this Command
13
Example 1
Set the brightness level of monitor at address 0.7 (group 0, address 7) to 200 (the
hexadecimal value of 200 is 0xC8, which is represented in ASCII as “C8” and split
into two ASCII codes as 0x43 0x38):
Monitor at address 0.7 (group 0, address 7) has acknowledged the new brightness lev-
el 130 (0x82):
Example 2
Query the current brightness level of monitor at address 0.7 (group 0, address 7):
Monitor at address 0.7 (group 0, address 7) has returned the current brightness level
200 (0xC8):
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR 0x4D 0x43 0x43 LEN ICHKH 0x81 Param Ret ICHKD
Ret
Value: “00”: dark … “FF”: bright
Type: Two-digit ASCII-encoded hexadecimal number
Length: 2
Description: Current brightness value
0 1 2 3 4 5 6 7...9 10
0x07 0x07
0x4D 0x43 0x43 0x03 0x1B 0x81 0x43 0x38 0x03
0 1 2 3 4 5 6 7...11 12
0x06 0x07
0x4D 0x43 0x43 0x05 0x1A 0x81 0x43 0x38 0x43 0x38 0x7D
0 1 2 3 4 5 6 7...8 9
0x07 0x07
0x4D 0x43 0x43 0x02 0x1C 0x81 0x3F 0x3F
0 1 2 3 4 5 6 7...10 11
0x06 0x07
0x4D 0x43 0x43 0x04 0x1B 0x81 0x3F 0x43 0x38 0xC4
- SCOM Protocol 1
- Foreword 2
- Contents 3
- 1 Interface Configuration 9
- 2 Ethernet Communication 10
- Dynamic Addressing 11
- Static Addressing 11
- Sample Application 12
- SCOM Message Basic Format 13
- 4 Monitor Addressing 15
- Ti: Inter-message gap [s] 16
- Delayed Response 17
- Related information 18
- 6 Command Reference 19
- 6.1 BRT 20
- 6.2 MAN 22
- 6.3 VER 23
- 6.4 POT 24
- 6.5 MCC 26
- 6.6 MCC_BRIGHTNESS (0x81) 28
- 6.7 MCC_CONTRAST (0x82) 31
- 6.8 MCC_SCALINGMODE (0x8C) 34
- Main Video Signal Source 37
- 6.10 MCC_GAMMAVALUE (0x9D) 40
- Selection 42
- 6.13 MCC_COLOURTEMP (0xB3) 47
- Maximum Lr for this Command 48
- 6.14 MCC_REDLEVEL (0xB4) 50
- 6.15 MCC_GREENLEVEL (0xB5) 53
- 6.16 MCC_BLUELEVEL (0xB6) 56
- 6.17 TYP 59
- 6.18 ETC 60
- 6.19 LAU 62
- Firmware Version 64
- Host Name 65
- MAC (Ethernet) Address 67
- Static IP Address 68
- Subnet Mask 69
- Gateway Address 70
- DHCP Mode 71
- (0x0109) 72
- (0x010A) 73
- (0x010B) 74
- (0x010C) 75
- (0x010D) 76
- DIL Switch Mode 77
- (0x010F) 78
- (0x0110) 79
- Baudrate 82
- POT Mode 83
- ECDIS Mode 84
- (0x0115) 85
- (0x0116) 86
- (0x0117) 87
- (0x0118) 89
- (0x0119) 90
- (0x011A) 91
- (0x011B) 92
- (0x011C) 93
- (0x011D) 94
- (0x011E) 95
- (0x011F) 97
- (0x0120) 98
- (0x0122) 101
- (0x0123) 103
- 0 1 2 3 4 5 6 7...8 9 104
- 0x07 0x07 104
- 0 1 2 3 4 5 6 7 8 104
- (0x0125) 105
- (0x0127) 106
- ECDIS Mode Control 107
- Command Reference 108
- Example 108
- Buzzer Control 109
- Digital Output Control 111
- 6.60 LAU_CONTROL_ANALOGTOBRT 113
- (0x0204) 113
- 0 1 2 3 4 5 6 7...9 10 114
- (0x0205) 115
- Digital Input Configuration 117
- Current IP Address 119
- Current Monitor Address 120
- Current POT Mode 123
- Current ECDIS Mode 124
- Current Buzzer State 125
- Current Backlight State 126
- Current Analog Input Value 130
- (0x030C) 132
- (0x030E) 135
- 7 Sample Communication 137
- Application 137
- CiS-Nr.: 360.610.0280 143
Manuais e produtos relacionados com Monitores Beijer-electronics SCOM Protocol EN
(131 páginas)
(22 páginas)Rotel RX-1050 manuals
Owner’s manuals and user’s guides for Receivers and Amplifiers Rotel RX-1050.
We providing 1 pdf manuals Rotel RX-1050 for download free by document types: User Manual
Comentários a estes Manuais